 |
|
| Framing Materials |
Exterior framed walls
• 2x6 moulded pine log siding
• 2x4 trim corners
• Tyvek water and air protection wrap
• 7/16” OSB sheathing
• 2x4 exterior stud walls @ 16” o.c. w/ double top and double bottom plate (total wall height 7’-10”)
• R-13 fiberglass insulation
• 2x6 pine log wainscoting with 5/8 Beaded Pine Board wall finish
• 1x4 base, corner, and ceiling trim
• Exterior Sikkens Cetol Log & Siding 2 coat Sealer
• Interior sealer Exterior doors and windows
• 1 3/4” x 3 1/2” exterior trim
• 3/4” x 3 1/2”interior trim •Caulking and moisture & air membrane
• Hinged entry door w/ hardware and locksets
• Windows; construction series windows (insulated glass w/grilles and screens)
Interior framed walls
• 2x4 common studs @ 16” o.c.
• 2x4 load bearing/plumbing stud walls @ 16” o.c.
• 2x6 Log wainscoting, with 5/8 beaded pine board wall finish
• 1x4 base, corner, and ceiling trim
• Interior sealer Interior doors
• Pre-hung (split jamb) raised panel solid pine wood doors w/hardware
• 1x4 door trim
Floor system
• 6x6 P.T. skid joists
• 2x6 PT joists w/2x6 PT joist bands
• 5/8” BC plywood subfloor
• R-9 Fiberglass Vinyl face insulation
• Floor underlayment
• Laminate Flooring
Roof System
• 25 Year M-Panel Metal Roof
• Drip edge, Rake Trim and ridge trim
• 30# felt paper
• 7/16 OSB roof sheathing
• 2x6 rafters @ 16’ o.c.
• R-19 Fiberglass insulation
• Decorative Metal Ceiling
Note: Some of the components listed above may not be standard options. Availability of components may vary per model. |
| |
|
|
|
